STUDY OF BONES AND JOINTS - ORTHOPEDICS

Orthopedic & Muscular System: Deals with musculoskeletal system viz., joints, ligaments, tendons, muscles and nerves. The journal combines the disciplines of study within the health and physical sciences.

Orthopedic surgery or orthopedics: Is the branch of surgery concerned with conditions involving the musculoskeletal system. Orthopedic surgeons use both surgical and nonsurgical means to treat musculoskeletal trauma, sports injuries, degenerative diseases, infections, tumors, and congenital disorders. Nicholas Andry coined the word "orthopaedics" in French as orthopédie, derived from the Greek words orthos ("correct", "straight") and paidion ("child"), when he published Orthopedie (translated as Orthopaedia: or the Art of Correcting and Preventing Deformities in Children) in 1741. The correction of spinal and bony deformities became the cornerstone of orthopedic practice.

In the US the majority of college, university and residency programs, and even the American Academy of Orthopaedic Surgeons, still use the spelling with the Latinate digraph ae. Elsewhere, usage is not uniform; in Canada, both spellings are acceptable; orthopaedics usually prevails in the rest of the British Commonwealth, especially in the UK.

History: Children's orthopedics: Many developments in orthopedic surgery resulted from experiences during wartime. On the battlefields of the Middle Ages the injured were treated with bandages soaked in horses' blood which dried to form a stiff, but unsanitary, splint.

Originally, orthopedic surgery was restricted to the correcting of musculoskeletal deformities in children. Nicholas André, a French professor at the University of Paris coine the term in the first textbook written on the subject in 1741. He advocated the use of exercise, manipulation and splinting to treat deformities in children.

Jean-Andre Venel established the first orthopedic institute in 1780, which was the first hospital dedicated to the treatment of children's skeletal deformities. He developed the club-foot shoe for children born with foot deformities and various methods to treat curvature of the spine.

Advances made in surgical technique during the 18th century, such as John Hunter's research on tendon healing and Percival Pott's work on spinal deformity steadily increased the range of new methods available for effective treatment. Antonius Mathysen, a Dutch military surgeon, invented the plaster of Paris cast in 1851. However, up until the 1890s, orthopedics was still a study limited to the correction of deformity in children.

Modern orthopedics: Hugh Owen Thomas, a pioneer of modern orthopedic surgery.

The men responsible for the development of modern orthopedic surgery were Hugh Owen Thomas, a surgeon from Wales, and his nephew, Robert Jones.Thomas became interested in orthopedics and bone-setting at a young age and, after establishing his own practice, went on to expand the field into general treatment of fracture and other musculoskeletal problems. He advocated enforced rest as the best remedy for fractures and tuberculosis and created the so-called 'Thomas Splint', to stabilise a fractured femur and prevent infection. He is also responsible for numerous other medical innovations that all carry his name: 'Thomas's collar' to treat tuberculosis of the cervical spine, 'Thomas's manoeuvre', an orthopaedic investigation for fracture of the hip joint, Thomas test, a method of detecting hip deformity by having the patient lying flat in bed, 'Thomas's wrench' for reducing fractures, as well as an osteoclast to break and reset bones.

Thomas's work was not fully appreciated in his own lifetime. It was only during the First World War that his techniques came to be used for injured soldiers on the battlefield. His nephew, Sir Robert Jones, had already made great advances in orthopedics in his position as Surgeon-Superintendent for the construction of the Manchester Ship Canal in 1888. He was responsible for the injured among the 20,000 workers, and he organised the first comprehensive accident service in the world, dividing the 36 mile site into 3 sections, and establishing a hospital and a string of first aid posts in each section. He had the medical personnel trained in fracture management.He personally managed 3,000 cases and performed 300 operations in his own hospital. This position enabled him to learn new techniques and improve the standard of fracture management. Physicians from around the world came to Jones’ clinic to learn his techniques. Along with Alfred Tubby, Jones founded the British Orthopaedic Society in 1894.

During the War, Jones served as a Territorial Army surgeon. He observed that treatment of fractures both at the front and in hospitals at home was inadequate, and his efforts led to the introduction of military orthopaedic hospitals. He was appointed Inspector of Military Orthopaedics, with responsibility over 30,000 beds. The hospital in Ducane Road, Hammersmith became the model for both British and American military orthopaedic hospitals. His advocacy of the use of Thomas splint for the initial treatment of femoral fractures reduced mortality of compound fractures of the femur from 87% to less than 8% in the period from 1916 to 1918.

The use of intramedullary rods to treat fractures of the femur and tibia was pioneered by Gerhard Küntscher of Germany. This made a noticeable difference to the speed of recovery of injured German soldiers during World War II and led to more widespread adoption of intramedullary fixation of fractures in the rest of the world. However, traction was the standard method of treating thigh bone fractures until the late 1970s when the Harborview Medical Center in Seattle group popularized intramedullary fixation without opening up the fracture.

The modern total hip replacement was pioneered by Sir John Charnley, expert in tribology at Wrightington Hospital, England in the 1960s. He found that joint surfaces could be replaced by implants cemented to the bone. His design consisted of a stainless steel one-piece femoral stem and head and a polyethylene, acetabular component, both of which were fixed to the bone using PMMA (acrylic) bone cement. For over two decades, the Charnley Low Friction Arthroplasty, and derivative designs were the most used systems in the world. It formed the basis for all modern hip implants.

The Exeter hip replacement system (with a slightly different stem geometry) was developed at the same time.Since Charnley, there have been continuous improvements in the design and technique of joint replacement (arthroplasty) with many contributors, including W. H. Harris, the son of R. I. Harris, whose team at Harvard pioneered uncemented arthroplasty techniques with the bone bonding directly to the implant.

Knee replacements using similar technology were started by McIntosh in rheumatoid arthritis patients and later by Gunston and Marmor for osteoarthritis in the 1970s developed by Dr. John Insall in New York utilizing a fixed bearing system, and by Dr. Frederick Buechel and Dr. Michael Pappas utilizing a mobile bearing system.

External fixation of fractures was refined by American surgeons during the Vietnam War but a major contribution was made by Gavril Abramovich Ilizarov in the USSR. He was sent, without much orthopedic training, to look after injured Russian soldiers in Siberia in the 1950s. With no equipment he was confronted with crippling conditions of unhealed, infected, and malaligned fractures. With the help of the local bicycle shop he devised ring external fixators tensioned like the spokes of a bicycle. With this equipment he achieved healing, realignment and lengthening to a degree unheard of elsewhere. His Ilizarov apparatus is still used today as one of the distraction osteogenesis methods.

Modern orthopedic surgery and musculoskeletal research has sought to make surgery less invasive and to make implanted components better and more durable.

In the United States, orthopedic surgeons have typically completed four years of undergraduate education and four years of medical school. Subsequently, these medical school graduates undergo residency training in orthopedic surgery. The five-year residency is a categorical orthopaedic surgery training.

Selection for residency training in orthopedic surgery is very competitive. Approximately 700 physicians complete orthopedic residency training per year in the United States. About 10 percent of current orthopedic surgery residents are women; about 20 percent are members of minority groups. There are approximately 20,400 actively practicing orthopedic surgeons and residents in the United States. According to the latest Occupational Outlook Handbook (2011–2012) published by the United States Department of Labor, between 3–4% of all practicing physicians are orthopedic surgeons.

 Many orthopedic surgeons elect to do further training, or fellowships, after completing their residency training. Fellowship training in an orthopedic subspecialty is typically one year in duration (sometimes two) and sometimes has a research component involved with the clinical and operative training. Examples of orthopedic subspecialty training in the United States are:

Ø  Hand surgery

Ø  Shoulder and elbow surgery

Ø  Total joint reconstruction (arthroplasty)

Ø  Pediatric orthopedics

Ø  Foot and ankle surgery

Ø  Spine surgery

Ø  Musculoskeletal oncology

Ø  Surgical sports medicine

Ø  Orthopedic trauma

These specialty areas of medicine are not exclusive to orthopedic surgery. For example, hand surgery is practiced by some plastic surgeons and spine surgery is practiced by most neurosurgeons. Additionally, foot and ankle surgery is practiced by board-certified Doctors of Podiatric Medicine (D.P.M.) in the United States. Some family practice physicians practice sports medicine; however, their scope of practice is non-operative.

After completion of specialty residency/registrar training, an orthopedic surgeon is then eligible for board certification by the American Board of Medical Specialties or the American Osteopathic Association Bureau of Osteopathic Specialists. Certification by the American Board of Orthopaedic Surgery or the American Osteopathic Board of Orthopedic Surgery means that the orthopedic surgeon has met the specified educational, evaluation, and examination requirements of the Board. The process requires successful completion of a standardized written exam followed by an oral exam focused on the surgeon's clinical and surgical performance over a 6-month period. In Canada, the certifying organization is the Royal College of Physicians and Surgeons of Canada; in Australia and New Zealand it is the Royal Australasian College of Surgeons.

In the United States, specialists in hand surgery and orthopedic sports medicine may obtain a Certificate of Added Qualifications (CAQ) in addition to their board primary certification by successfully completing a separate standardized examination. There is no additional certification process for the other subspecialties.

 Practice: Radiography to identify eventual bone fractures after a knee injury.

Orthopedic implants to repair fractures to the radius and ulna. Note the visible break in the ulna. (right forearm)

According to applications for board certification from 1999 to 2003, the top 25 most common procedures (in order) performed by orthopedic surgeons are as follows:

Ø  Knee arthroscopy and meniscectomy

Ø  Shoulder arthroscopy and decompression

Ø  Carpal tunnel release

Ø  Knee arthroscopy and chondroplasty

Ø  Removal of support implant

Ø  Knee arthroscopy and anterior cruciate ligament reconstruction

Ø  Knee replacement

Ø  Repair of femoral neck fracture

Ø  Repair of trochanteric fracture

Ø  Debridement of skin/muscle/bone/fracture

Ø  Knee arthroscopy repair of both menisci

Ø  Hip replacement

Ø  Shoulder arthroscopy/distal clavicle excision

Ø  Repair of rotator cuff tendon

Ø  Repair fracture of radius (bone)/ulna

Ø  Laminectomy

Ø  Repair of ankle fracture (bimalleolar type)

Ø  Shoulder arthroscopy and debridement

Ø  Lumbar spinal fusion

Ø  Repair fracture of the distal part of radius

Ø  Low back intervertebral disc surgery

Ø  Incise finger tendon sheath

Ø  Repair of ankle fracture (fibula)

Ø  Repair of femoral shaft fracture

Ø  Repair of trochanteric fracture

A typical schedule for a practicing orthopedic surgeon involves 50–55 hours of work per week divided among clinic, surgery, various administrative duties and possibly teaching and/or research if in an academic setting. However, this figure can be as high as $1,500,000.

Arthroscopy: The use of arthroscopic techniques has been particularly important for injured patients. Arthroscopy was pioneered in the early 1950s by Dr. Masaki Watanabe of Japan to perform minimally invasive cartilage surgery and reconstructions of torn ligaments. Arthroscopy helped patients recover from the surgery in a matter of days, rather than the weeks to months required by conventional, 'open' surgery. It is a very popular technique. Knee arthroscopy is one of the most common operations performed by orthopedic surgeons today and is often combined with meniscectomy or chondroplasty. The majority of orthopedic procedures are now performed arthroscopically.

Arthroplasty: Arthroplasty is an orthopedic surgery where the articular surface of a musculoskeletal joint is replaced, remodeled, or realigned by osteotomy or some other procedure. It is an elective procedure that is done to relieve pain and restore function to the joint after damage by arthritis or some other type of trauma. As well as the standard total knee replacement surgery, the uni-compartmental knee replacement, in which only one weight-bearing surface of an arthritic knee is replaced, is a popular alternative.

Joint replacements are available for other joints on a limited basis, most notably the knee, shoulder, elbow, wrist, ankle, spine, and finger joints.

In recent years, surface replacement of joints, in particular the hip joint, have become more popular amongst younger and more active patients. This type of operation delays the need for the more traditional and less bone-conserving total hip replacement, but carries significant risks of early failure from fracture and bone death.

One of the main problems with joint replacements is wear of the bearing surfaces of components. This can lead to damage to surrounding bone and contribute to eventual failure of the implant. Use of alternative bearing surfaces has increased in recent years, particularly in younger patients, in an attempt to improve the wear characteristics of joint replacement components. These include ceramics and all-metal implants (as opposed to the original metal-on-plastic). The plastic (actually ultra high-molecular-weight polyethylene) can also be altered in ways that may improve wear characteristics.

There are many types of arthritis, but most will start with similar symptoms. Keep an eye out for the early signs of arthritis, and let your doctor know if you think you may be developing symptoms of arthritis.

Ø  Joint Pain: Sebastian Kaulitzki:  The most common symptom of arthritis is joint pain, and this is the reason most people seek medical care for their arthritis. The type of pain can vary depending on the type of the arthritis and the severity of the condition. Most people who have arthritis describe an aching pain in the joint that is worsened by activity and relieved by rest. The amount of joint pain usually corresponds to the amount of activity.

Ø  Joint Swelling: Swelling of a joint can occur with many conditions, but the most common cause of joint swelling is arthritis. The second most common cause of swelling is an injury to the joint. So if no injury has occurred, it is possible that the swelling is due to arthritis. Sometimes laboratory analysis of the fluid itself can help determine if there is arthritis or another cause of joint swelling.

Ø  Stiffness of Joints: People who have arthritis almost always feel stiffness in their joints. You can check your joint motion by comparing it to the joint on the opposite side. Stiffness is usually worse in the morning or after long periods of sitting in one position. As the joint moves with activity, it usually loosens a bit. Other ways to loosen a stiff joint are with heat application and anti-inflammatory medications.

Ø  Deformity of Joints: As joint cartilage is worn away by arthritis, the extremity may take on a deformed appearance. Just as if the tread is worn off your car tires, if enough joint cartilage is worn away, the joint may take on an angled appearance. This is often seen in the hands as crooked fingers. In the knee joint, people with arthritis may develop a knock-kneed or bow-legged appearance.

Ø  Grinding Sensations: As joint cartilage is worn away, the smooth lining covering the rough bone is lost. When the bone is exposed, the joint may not move smoothly. You may feel or even hear a grinding sensation. Place your hand on the joint as you bend back and forth and feel for a grinding sensation of the joint.

Ø  Lumps and Bumps Around Joints: Arthritis can cause the formation of pockets of fluid (mucous cysts) or bone spurs. These are felt as knobby protuberances around the joint. They may or may not be sensitive to the touch, but they do give a lumpy appearance to the joint. Most people notice these on the small joints of the fingers, although they can occur throughout the body.

Ø  Joint Tenderness: Joints that are arthritic are tender to the touch. If one side of the joint is more involved with arthritis than the other, the worse side is usually more tender. Pressing around the joint and having an elicit pain is a reasonable indication that the joint is inflamed, and that it may have underlying arthritis.

Ø  Warm/Red Joints: Joint inflammation can lead to symptoms of joint redness and warmth. These symptoms should be evaluated by your doctor because they can also be suggestive of a joint infection. However, it is not uncommon for the inflammation associated with arthritis to lead to redness and warmth of the joint.